Ricerche simili /Similar searches

Risultati per Kiss cutting gap

Di seguito l'elenco dei risultati di ricerca trovati rilevanti per la keyword 'Kiss cutting gap':

Risultati maggiormente rilevanti:



 hx 500jxs kiss cutting with gap
1. Firstly two layers are laminated together and then the materials will be kiss cut or completely cut. 2. Kiss cutting, space can be set according to your requirement. 3. Different space can be ...

 risultati per kiss cutting gap - guidolin girotto
Kiss cutting is specifically used to create a thin shape with a liner that will protect it until you're ... thermal gap filler pads – provided kiss cut on release ... The high speed knife blade can be programmed to kiss cut thermal gap filler pads from .020” to .250” thick against a protective release liner.

 what is kiss cutting and what is a kiss cut gasket ...
Kiss cutting is a die cutting process where a gasket or pad is supplied rolled up on the adhesive liner. If you were able to watch the cutting process in slow motion you would see the die penetrate the gasket or pad material, then continue through the thin adhesive layer and cut partially into the adhesive liner.



Altri risultati:



 kiss cutting - kiss cut labels | american micro industries
Die cutting is used to cut into materials of a variety of thicknesses to create a desired part or shape. Kiss cutting is specifically used to create a thin shape with a liner that will protect it until you're ready to remove the shape to use it for your application. This precision cutting and protective liner make it ideal for not only stickers and labels, but also for closed cell sponges, gaskets, foam and similar parts and materials.

 adhesive tape gap laminating machine with kiss sheet cutting
MP: 86-13913244372 Wechat: ping8613913244372 Email: dancing9@hotmail.com Skype: chris407497987 QQ: 407497987.

 china conductive foam, tape, kiss cutting, gap cutting ...
Conductive Foam, Tape, Kiss Cutting, Gap Cutting Machine 500 Function And Characteristic: CQT-500 Gap cutting machine Double servo motors, double synchronization, the dragging precision can be +/-0.1mm%, max. feeding width is 520mm, valid width is 500mm, it is gap cutting, in this case, can avoid waste material. Machine is only or cut straight lines.

 thermal gap filler pads – provided kiss cut on release ...
The high speed knife blade can be programmed to kiss cut thermal gap filler pads from .020” to .250” thick against a protective release liner. However, the high speed digital knife cutting process reduces edge tackiness, allowing thermal pads to be provided on a sheet with a material saving common line cutting patch.




Last Search Plugin 2.03

Contatti

GUIDOLIN GIROTTO SRL, HEADQUARTERS AND FACTORY
Via Orta, 27 - 27029 Vigevano (PV) - Italy
Tel.: +39 0381 20698
Fax: +39 0381 20998
E-mail: Questo indirizzo email è protetto dagli spambots. È necessario abilitare JavaScript per vederlo.
P.Iva: 01699030183
Cap. Sociale € 50.000
R.E.A.: PV - 213174